Showing posts with label Lisa's Altered Art. Show all posts
Showing posts with label Lisa's Altered Art. Show all posts

Monday, February 18, 2019

Wear it again tomorrow



Hi Guys,
I'm up on the Gypsy Soul Laser Cuts blog today.

I've been in a bit of a snarky mood lately and when I saw this lady I knew she needed to be used for a project.

I started by taking my Laurel Frame and covering it with a layer of gesso using a foam brush.  Using the same brush I added some Dina Wakley Paint.  I didn't clean the brush between uses so there was still gesso in there creating different shades of blue.
Using the script stamp from the Tim Holtz Entomology Set(CMS328). I stamped across the frame in Hickory Smoke Oxide Ink.  I sealed the ink using Micro Glaze.
This photo was cut to fit inside the frame.
For the back panel I used a 5x7 canvas board and loosely painted it using the paints pictured.  I added some stamped bits from the Time Holtz Mini Media Marks(CMS364).  These were done with Archival Ink in Black Soot and Hydrangea.  Before I finished my project I added in a bit of Victorian Velvet Distress Paint to pick up the pink you see in the background piece.  
To mount the photo I used a piece of humble cardboard.  Peel parts of the top layer to expose the corrugate and then cover with gesso.  I did a couple thin layers to cover all of the brown.  I added some collage paper to the bits that still had the full cardboard using collage medium.  To color the cardboard and collage paper I used Distress Crayon(Victorian Velvet, Cracked Pistachio, Worn Lipstick, and Gathered Twigs) and water to give it a dreamy hazy look. Pearl details were added to the frame and the snarky sentiment. 
To complete the piece I painted a set of  Mini Petal Corners using Dina Wakley Ancient Paint.  
 A couple close ups of the finished details. I ended up going back with Jet Black Archival ink and restamping the script on the frame.  I added a bit of DIstress Crayon in Gathered Twigs to dinge it up.  There is a teeny bit of the Dina paint in Ancient on there too.
I love the grungy look the cardboard gives. 

Layers and details.  
I hope you like her and take her sage advice!
Jess





Monday, June 18, 2018

Shine your Light


Hi Everyone,
I am up on the Gypsy Soul Laser Cuts Blog today.
I don't have a lot of steps out for this one because I was feeling a bit under the weather when I crafted and forgot to take photos.  I will still walk you through all the steps. 
Cut a piece of paper large enough to cover your Large Chipboard Tag.  Using a piece of sticky fabric tape run it down the edge of you paper and stitch it on using your sewing machine.  Glue the paper to the tag.  Once your adhesive is dry cover the entire tag with clear embossing powder.  While the embossing powder is still hot using foil to add tiny bits of gold. 
Paint your Wood Medallion using Mowed Lawn and Black soot Distress Paints.  Add gold accents using a gel pen.  Glue to the top of your tag.  
Paint your Scribble Leaves Frame using Mowed Lawn Distress Paint and buff with a bit of Dina Wakley Paint in Gilt.  
Using foam tape pop up your focal image and adhere her to the center of the tag.  Attach your scribble frame using a strong adhesive. 

Glue down your sentiment and scribble around the edges using a Fude Ball Pen.  Add Distress Crayon in Black Soot to the edges of the tag. Add flowers to the woman's hair and to the tag.  
Enjoy!
Jess

Monday, January 15, 2018

I'm a bad girl...

Hi Everyone,
I'm up on the Gypsy Soul Laser Cuts blog today.


Well, I didn't plan to do two reading themed items this month for them, but it happened.  I'm a huge reader.  It's not often that I am not in the middle of a book.  Any reader will tell you that they always need bookmarks.  Yes, I've used napkins, receipts, post it notes, and other random bits of paper to mark my pages.  I wanted to make a little something nice to actually mark my page.

I covered one of the Extra Large Chipboard Tags using vintage card catalog cards.  The edges were embossed using Emerald Creek's Salted Raven just to add a little bit extra. 
I painted my Medium Circle Border using Distress Paints in Picked Raspberry, Fossilized Amber, Wild Honey, Black Soot, and Spiced Marmalade and glued it on my tag.  
I added the vintage image and verbiage using foam tape.  Since the circles make the background uneven I used different layers of tape to make the image flush.  
Easy and now I can mark my book nicely! 
Jess

Monday, January 1, 2018

Snarky New Year!

Happy New Year from this party animal!
If you made it until midnight, then you stayed up later than me.  I never make it until midnight.  I have a little project for you today that shows you that I really know how to party.
I used the Tiny Matchbox Theatre from Gypsy Soul Laser Cuts to make my party animal box. 
 I covered the box with old book paper.
I used Dina Wakley Paints to add some pops of color.  The edges have some Distress Crayon in Hickory Smoke and Black Soot. 

The image inside is from Lisa's Altered Art and it is popped up using foam tape.  I added the little party hat and book.  There's some fun washi tape behind her just for visual interest.  

I hope you have an amazing 2018! 
Jess

Monday, June 19, 2017

Beach Dreams


Hi Everyone, 
I'm up on the Gypsy Soul Laser Cuts blog today with a fun vintage inspired postcard.

I've been dreaming of the ocean.  I grew up near the beach and every summer all the girls in our family used to spend a week in York, Maine.  I am now in Arizona and don't get to the beach nearly enough.  I think this postcard is as close as I will get this year.  Here is how you can create your own. 
I started with a piece of paper mounted on a piece of mat board.  I randomly added crazing medium and then added Distress Crayon in Hickory Smoke and Broken China to show off the cracks.  

Both umbrellas were colored using Distress Stains(candied Apple, Broken China, Fossilized Amber, and Vintage Photo).  I did not prime them with gesso.  I wanted them to look slightly faded and the stain seeps into the chipboard.  Once the stain was dry I covered them with Emerald Creek's clear embossing powder. It's not completely covered.  I left some blank spots so it looks a bit tattered and sun faded.  

The waves are all embossing using various Emerald Creek embossing powders and then layered. The top wave has a layer of Salted Navy and then a layer of Soft Fallen Snow.  The middle wave has Broken China Distress Stain and then Fractured Ice embossing powder.  The last wave has a layer of Salted Navy and then is topped with Blue Pearl.  

The sand dollar was punched with white acrylic paint using a dry brush so some of the chipboard color is still visible.  The starfish are embossed with San Tropez Tan.  The shells are coated with a thin layer of gesso, a bit of Nuance Powder in Jade, and embossed with Fractured Ice. Don't the starfish look real?
The sand is torn paper that has been inked using Antique Linen and Tea Dye Distress Inks.  I glued them in layers and tucked in all of my pieces.  I love that her foot is buried in the sand.

 My sentiment is the finishing touch; 
I adding some shadow around it and the lady using distress crayons and a Fude ball pen.

Anyone want to take me to the beach this summer?

Monday, January 2, 2017

Snarky Clipboards

Hi Everyone,
I have joined a new design team.  This is my first project for Gypsy Soul Laser Cuts.  You must check out the blog for some crazy good inspiration.

I created some mini clipboards and they are super easy to make.

I started with my blank clipboard.  They come four to a package and you get the bases, the clips, and the clip cover.

I did a light messy layer of gesso on the base and clip cover.

Once my gesso was dry I started to layer on vintage papers.  I used a whole bunch of random bits.  I can't read dictation, but how perfect is this little bit for this project? I just ripped and layered until I covered the whole board.

I added some scraps of patterned paper, smudged on a bit of acrylic paint, and topped the whole thing off with a layer of collage medium.

Once the collage medium was dried I used Distress Crayons to grunge up the paper.

 The lovely lady was added and her quote.  I stuck these on with collage medium too.

While the collage medium dried I glued my clip to the clip cover.  I painted the clip cover, but decided that wasn't quite working.  Embossing powder was the answer to my problem.
A few scribbles were added around the lady and the quote.  Clipboard complete!


I made a second board using the same technique, but I added some stamps and washi tape to this one.

I hope you enjoyed my first project.  I can't wait to show you what I have up my sleeve for my next post.
Jess

Gypsy Soul Products Used:
mini clipboards

Other Products Used:
Acrylic Paint
Archival Ink-Jet Black
Collage medium
Distress Crayons
Embossing Powder
Gesso
Strong Adhesive
Various patterned papers and vintage papers
Washi Tape

Sunday, November 6, 2016

My Spirit Cannot be Caged

Hi Everyone,
Since my crafting mojo seems to be on a hiatus right now I thought I would revist some Fairy Cages I made when I was on the Unruly Paperarts design team.  The theme was "Winging It" and those of you that follow me here and on other social media know I am a sucker for a good fairy.





I bought these tiny bird cages on clearance and stashed them knowing that I would find a use for them. I use images from Lisa's Altered Art all the time. She has fantastic ballerinas, women, children, and wing images. When I was playing around one day I discovered some of the girls would fit right in the cages. I added wings to them to make them into fairies. They got all gussied up with tulle skirts, feathers, and bits of bling.



I added a ton of flowers to the bottoms of the cages. Some of the flowers I made and some I purchased. I didn't want the cages to close, so the flowers spill out and wrap around the bases.


The base on this one is a giant wooden spool that is wrapped with twine.



The base on this one is a plaster pillar of some sort (again from the craft hoard). I added a little birdy to the outside of the cage and it's done!



Here's hoping my mojo comes back soon!

Jess

Disclaimer Notice

I've received products/compensation as part of the Gypsy Soul Laser Cuts Design teams. My projects, however, are 100% my own.