Tuesday, March 6, 2018

Cherished

Hi Everyone,
I am super excited to be a guest on the Try It on Tuesday blog.  Their current theme is "Mum's the Word." 
I chose to make this vignette tray featuring the cutest little boy and his mum. 
I started by covering my journal block using a light layer of gesso. I'm pretty ok with the natural chipboard color showing through on a lot of my projects(sometimes I just use the raw chipboard).  If you want a really solid color on top you can just add a bit more gesso.  I also use a foam makeup applicator to apply the gesso.  I find I can pounce the gesso on and it doesn't clog up the little detailed bits.
I lined my vignette tray with a piece of paper from the Tim Holtz wallflower collection and lined the edge with decorative tape from the Rose set. 
The inside edges were whitewashed using thinned out white acrylic paint.  

I splattered the inside using Distress Paint in Black Soot, Picket Fence, and Sterling.

Using Archival ink in Jet Black, I stamped the middle of the journal block using the Tim Holtz Papillon set. I painted all of the flower bits using Dina Wakley Media Paints(Turquoise, Sky, Blushing, and Lemon) and Tim Holtz Distress Paints(Forest Moss and Twisted Citron).  To color the center of the block I smooshed Distress ink(Tumbled Glass, Salty Ocean, Walnut Stain, and Pumice Stone) on my craft mat and spritzed it with water.  Make sure to dry between layers to prevent mud! The edges were antiqued using Distress Crayons(Black Soot and Vintage Photo).     
I placed my journal block in the tray and fiddled with cheesecloth behind.  You might notice in my finished piece I flipped the journal block.  Don't glue anything down until you're positive that's where it's going to stay!

 
I cut one of the Tim Holtz rulers using my scissors to fit the tray and then colored it using Tea Dye and Walnut Stain Distress Stains. 
I colored my image using Distress Markers and Oxide Inks.  
This is why I flipped my journal block.  I liked my sentiment better on the larger flowers.  I mounted the jornal block on foam tape to give extra height and dimension.  The sentiment and paper doll were also mounted using foam tape. 
I added the Typography letters and made sure the word I wanted to use fit before gluing it down(hence the super crooked letters).  Mum got a bouquet of vintage flowers.  
I added a metal photo corner and colored it using Distress Paint and Crayons.  
The letters got a very light wash of Oxide Ink and Paint mixed together.  
I hope you enjoyed! 
Jess

I am also entering this into  A Vintage Journey's Treasure challenge- my treasure on here are the vintage flowers the mum is holding.  





Monday, March 5, 2018

Steampunk Goddess

Hi Everyone,
Jess here today with my first post of the month for Gypsy Soul Laser Cuts.  
I am not a steampunk girl.  It's not really in my wheelhouse.  I dabble here and there, but when I saw this Steampunk Cage Dressform I knew I had to make something with it.  Honestly, it was super easy to make, so today's tutorial will be super short.

Cover your base using Seth Apter's new Baked Texture Embossing Powders.  The base layer here is Rocky Road.  The different patches of color are from Dirty Sand, Chunky Rust, and Patina Oxide. 
Here's another shot.
It's gorgeous and you don't have to prep the chipboard before applying the powder.  I just slapped on the embossing ink and went to town.  The secret to the layering is really just heating up the base layer(in this case the Rocky Road) and sprinkling on the color you want to add.
The dress form was covered with a thin layer of gesso and then I added Distress Oxide Ink in Cracked Pistachio. 
I covered that with Ancient Amber Embossing powder and added gears.   The wings are covered with the same ink and then embossed using Vintage Beeswax and sprinkled with Patina Oxide and Deep Sea embossing powders.  
Her back has a key to wind her up.  
I colored a vintage chandelier crystal using Alcohol Ink in Mushroom and hung it from the center of the gear to complete the piece.  
Where the pieces joined together I used black paint to hide the raw chipboard. 


I hope you like her! 
Jess

Monday, February 26, 2018

Fanciful Flight

Hi Everyone,
I have a fun card for you over on the Blank Page Muse blog today.  There is a full tutorial on how you can make this whimsical card.
Thanks for popping by,
Jess

Monday, February 19, 2018

Salvaged Heart


Hi Everyone,
I'm up on the Gypsy Soul Laser Cuts Blog today with this beautiful shabby chic piece.
This was really simple to put together.  Start by covering both sides of  your Dress Form Tag with the paper of your choice.  I inked the edges of my paper. 
  
Cover the largest set of wings from the Wings Assortment with gold embossing powder. Once the wings have cooled off attach them to the back of the tag using a strong adhesive. 

 Cover the base of your Flourished Heart Frame with DIna Wakley Media Paint in Blushing.  This is a bold pink and I used a wash of cheap brown acrylic paint to tone it down for this project.  

Cover the top of your frame with Finnabair Paint in Royal Red.  While the paint is still wet cover the heart with Distress Embossing Powder in Vintage Photo.  This makes the heart look old and kind of crusty.  Perfect for this project.     


Glue your frame together and attach it to the dress form tag.  Finishing the main part of the piece just took using a Tim Holtz Chip word that I banged on the side of my desk to ding it up.  Vintage photo Distress Ink covers the chip word.  
I used an old spindle to make my base.  I stuck a Tim Holtz Memo Pin in the top and then wedged the finished project into it.  I love the look of sari ribbon for making bows.  This one has a large off white bow and a smaller pink bow to cover where the pin got stuck into the spindle. 
The spindle is fun because you can just pop this piece out and change it up for the season.  
Enjoy! 







Saturday, February 10, 2018

Listen to your Heart

Hi Everyone,
I'm up on the Blank Page Muge Blog today, sharing my take on this month's theme of Blue Heart and Time.


I started by cutting three small tags out on my Sidekick. I stamped and embossed the Heart with small Crackle.
I also stamped and embossed the Steampunk Pocket Watch. I didn't want the wings so I didn't really ink them. 

You can see both of these pieces look a little messy.  There's embossing powder residue on both pieces and I am ok with that.  I like the little speckles and spots the extra powder leaves behind.  My work often has powder randomly sprinkled on anyhow.  
Using a waterbrush I wet the heart and then sprinkled on watercolor powder.  I like using these powders since they aren't a solid color, but flecks of varying shades.  I used a crayon to color the outside and then spritzed a black marker to make the speckles.  
I added my watch tag between the two halves of the heart and colored it in a similar manner.  I glued them together and then added my sentiment stickers.  To finish the centerpiece I scribbled around the stickers and stamps using a black pen.  
I mounted the tags on top of a piece of distressed cardstock.  The distressed piece was adhered to the card base using a tiny stapler.  
I hope you enjoyed my step out for today.  
Don't forget to enter in the challenge.  You can do so right here.  
Jess



Monday, February 5, 2018

Love Bugs



Hi Everyone, 
I'm up on the Gypsy Soul Laser Cuts Blog  today with the cutest little captured Love Bugs! When I saw these new canning jars I knew I needed to capture something adorable in them. Scroll down and see how you can capture your own. 


Cover your Mini Canning Jar lid using a Hammered Metal embossing powder.  While the powder is still hot press in your scissors to make the lines on the lid.
Cover the edges of your jar with Fractured Ice embossing powder. 

Cut a piece of acetate to line the back of your jar.  It doesn't need to look pretty, it just needs to cover up to the edges.  

Cut wings out using the Tim Holtz Butterfly Frenzy Die.  This die has a ton of different small butterflies on it, so you can mix and match your wings.  I edged all of the wings using Distress Inks. Color in your paper doll using Distress Markers.  I used the smallest of the paper dolls in these jars.  Give each doll a heart and place them on a small piece of paper from the Tim Holtz wallflower paper collection.    
Glue your paper doll to the paper and glue the paper to the jar.  Trim your paper so nothing shows from the sides.  Cover the Chunky ATC blanks using vintage book paper and embellish with rub ons,  clipping stickers, and scribbled gel pen. Glue your jar to the ATC.  Add a stick pin to the top of the jar. Another tiny rub on works perfectly on the stick pin.  

Paint the back of your ATC black and add a little story using stickers.  These are from the Tim Holtz clippings pack.  Use gel pen to doodle and scribble around the stickers.  

There are three cards in the Chunky ATC blanks package, so I created a trio of Love Bugs.  


The little guy was actually my first Love Bug.  I got so excited when I made him that I didn't take my step out photos.  

I love how I was able to get twins in this jar! 

To complete the display I painted the ATC Stand black and edged it in gold.  Now my fairies can be displayed properly. 
I hope you enjoy and try to catch some love bugs of your own!

Try it ON Tuesdays- Fire and Ice (I used Fractured Ice embossing powder)

Friday, January 26, 2018

Make A Wish


Hi Everyone,
I have a full step by step tutorial for you over on the Blank Page Muses Blog today.  
I would love for you to pop over and check it out. 
Jess

Disclaimer Notice

I've received products/compensation as part of the Gypsy Soul Laser Cuts Design teams. My projects, however, are 100% my own.